Before and after, from sites across Canada
A selection of recent work from across Canada. Clients are not named.
The back receiving doors were damaged, and the existing exit device did not meet code.
We supplied and installed a new pair of hollow metal doors with new hinges, an exit device, a door viewer, flush bolts and weather-stripping. The existing lockset was reused, and both doors were painted to match the building.
Before
Installed
FinishedAn exterior emergency exit needed a new door, frame and hardware.
We supplied and installed a new hollow metal door and frame with an exit device and trim, a door closer, a threshold and weather-stripping. The existing cylinder was reused, so the keys did not change.
Before
AfterThe existing dock leveler had been condemned and could not be used.
We removed the old leveler, cut and excavated the existing concrete, and formed and poured a new pit. A pit box and a hydraulic dock leveler, 6 ft by 6 ft and rated for 30,000 lb, went in with two laminated bumpers.
Before
During
AfterTwo large sealed units in the front windows needed replacing.
We supplied and installed two clear, tempered, low-E sealed units, each about 87 by 74 inches. Four technicians handled the lift, so the old glass came out and the new glass went in safely.
During
AfterThe frame of an exterior door had rusted out at the base.
We supplied and installed a new hollow metal door and frame with a door closer, threshold, hinges, weather-stripping, a door sweep, panic hardware and a kick-down door stop. The existing alarm contacts were refitted to the new door.
Before
After
After