Overhead Door Maintenance

Key points

  • Springs and cables are under high tension. Staff should look, not adjust.
  • Most overhead door failures give warning signs first.
  • The busier the door, the shorter the service interval.

An overhead door is the heaviest moving object in most buildings, and it is counterbalanced by springs that store a great deal of energy. Regular maintenance keeps it working. It also keeps it safe.

What your staff can check

  • The door travels smoothly and stops level at the top and the bottom.
  • Cables are not frayed and sit properly on the drums.
  • Rollers turn freely and the tracks are not bent.
  • The photo-eye or reversing edge stops and reverses the door when tested.
  • Weather seals are intact along the bottom and the sides.
  • Nothing is stored where the door or its tracks need to move.

What to leave to a technician

  • Springs, cables, drums and bottom brackets.
  • Counterbalance adjustment.
  • Operator limits, force settings and safety devices.
  • Track alignment and any structural repair.

Signs a door needs service now

  • The door drifts down, or feels heavy when lifted by hand.
  • One side travels ahead of the other.
  • There is a visible gap in a spring coil, which means the spring has broken.
  • A cable is frayed or has come off its drum.
  • The operator strains, stops or reverses for no clear reason.

If a spring or cable breaks, stop using the door and keep people clear of it. Do not run the operator.

How often to service

Interval depends on how many times a day the door cycles and what it is exposed to. Dock doors and parking garage doors work much harder than a door opened twice a day. Our guide on how often commercial doors should be serviced covers typical intervals.

Fire doors and shutters

Rolling steel fire doors and fire shutters have their own requirement. NFPA 80 calls for them to be inspected and drop-tested every year. See rolling steel and fire shutters.

We service overhead doors and dock equipment across Canada.