Wired glass has a grid of fine wire set into it. It is common in older school, hospital and stairwell doors. The wire holds the glass together in a fire, and many people assume it also makes the glass strong. It does not.
The wire weakens the glass. Traditional polished wired glass is weaker than ordinary glass of the same thickness, and when it breaks the wire can hold sharp pieces in place around the opening. A hand or arm pushed through the panel is the typical injury.
The Canadian General Standards Board revised its safety glazing standard, CAN/CGSB-12.1, in 2017. At the same time it withdrew the separate standard for wired safety glass, CAN/CGSB-12.11. Under the revised standard, traditional polished wired glass does not qualify as safety glazing for doors, sidelights and similar places where people can walk or fall into the glass.
Building codes adopt standards on their own schedules, so ask your building official which edition applies to your project.
| Location | Suitable glazing |
|---|---|
| Doors and sidelights with no fire rating | Tempered or laminated safety glass |
| Fire-rated doors, sidelights and screens | Fire-rated glazing that is also tested for impact safety |
For the difference between the two common types of safety glass, see tempered and laminated glass.
The standard governs new glazing. Whether existing panels have to come out depends on your jurisdiction, your insurer and your own risk assessment. The panels to look at first are in doors, sidelights and at body height in corridors, gyms and stairwells.
A fire-rated door or frame carries a label, and the glazing in it is part of that rating. Replacement glass has to be listed for the same rating and installed with the correct glazing bead and tape. Otherwise the label no longer applies.
Source: CAN/CGSB-12.1-2017, Safety Glazing.
We replace glass in commercial doors, sidelights and storefronts across Canada. See commercial glass services.